not good mate,i hope some one on here can help you out
not good mate,i hope some one on here can help you out
take the stock/ shroud off, remove end cap and spring, check power adjuster is not buggered.. or just unscrew the course threaded collar and remove. if it still won't fire get a large puch and a small hammer and the tap the vale stem directly.
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
need to see what the problem is first.
if the valve stem is getting stuck, it could be the profile of the mushroom head, somehow settling into and jamming into the valve face itself. But that would be unnusual, unless it's been previously modified, or made from a dodgy batch.. the material is delrin like. Maybe it could save some grease of something sticking in there ? Or an excessively heavy valve return spring. It's quite weird.. see if a few taps frees it up first.
Then again, maybe it could be as simple as a bent stem.. trouble is, if the stem was that bent, I wouldn't expect the head to seal. and those stems are thick / heavy duty as standard.
Puzzling.
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Is it possible that something has come adrift at the valve return spring end, a strip down seems the only way to get to the bottom of it in my opinion.
John
Law of any kind only affects those willing to abide by it.
I changed the hsmmer spring to a predetor heavy duty one last year as fitting a heavier hammer spring fixed this problem on tinbums gun as it had the exact same problem but makes the gun a bugger to cock. Has been working fine up to now. Am i right i. thinking the hammer runs dry as in all other pcp's jon? Is it the hammer or valve face delrin jon as you confused me a bit. Chris
Could it have had the valve messed with in the past and now it takes a real heavy spring to open it and the transfer port is doing it’s job of restricting the power back down to sub 12 levels?