Brockock enigma air tube.

[duomatic410]

I removed one a while ago as it became belled around one end, probably could cut it back and re use it, I think I got my replacement from Silco, but it was a couple of years ago.....

This as belled,
Someone tried to put 300 bar into it for more power, and we all know what that causes.
Not heard of Silco?
Am sure the same cylinder dimensions would be used on other makes/ models perhaps probably same threading.
Will just keep trying.👍

[ZAKDINGEL]

You might find that the inside diameter is the same as the AA --im sure I read on here that somebody had used a AA cylinder on one look here http://www.airgunbbs.com/showthread....brocock+enigma

[duomatic410]

You might find that the inside diameter is the same as the AA --im sure I read on here that somebody had used a AA cylinder on one look here http://www.airgunbbs.com/showthread....brocock+enigma

THanks for that, will borrow the son in laws 410 and check it out,👍

[ZAKDINGEL]

THanks for that, will borrow the son in laws 410 and check it out,👍

Please Keep us informed on the outcome

[duomatic410]

Please Keep us informed on the outcome

I will do that.👍

[duomatic410]

Have just tried a AA cylinder, threads the same, depth the same.
About 1/2 inch in length different (carbine) but as it's a free floating barrel don't see a problem.
Will order one to morrow 👍

[Shed tuner]

Have just tried a AA cylinder, threads the same, depth the same.
About 1/2 inch in length different (carbine) but as it's a free floating barrel don't see a problem.
Will order one to morrow 👍

Good to confirm, thanks...

[ZAKDINGEL]

Have just tried a AA cylinder, threads the same, depth the same.
About 1/2 inch in length different (carbine) but as it's a free floating barrel don't see a problem.
Will order one to morrow 👍

Great thanks for the update I did see a used air tube for AA on that auction site might be worth a look??