Brockock enigma air tube.

[duomatic410]

Getting hold of one of these a nightmare.
Havnt had a response from Brockock and no one else seem to be able to supply one.
Would think some other model would fit but in dark on this.
Any ideas gents?

[wild dogman]

I was told air arms 410 tube will fit

[bezzer]

AirArms 400/500 tubes are M29x1.25 threads. Carbines is 300mm long, standard 400mm. Measure the ends of yours to see if similar.

[duomatic410]

Thanks gents.
Have somewhere an end from a 410 tube, and that's the problem, somewhere.
Have spent an hour discovering what I forgot I had but not that bit.
The enigma is 32 mm diameter.

[Shed tuner]

The enigma is 32 mm diameter.

OD or ID ?

[duomatic410]

OD thanks.

[AC all day]

I removed one a while ago as it became belled around one end, probably could cut it back and re use it, I think I got my replacement from Silco, but it was a couple of years ago.....

[duomatic410]

I removed one a while ago as it became belled around one end, probably could cut it back and re use it, I think I got my replacement from Silco, but it was a couple of years ago.....

This as belled,
Someone tried to put 300 bar into it for more power, and we all know what that causes.
Not heard of Silco?
Am sure the same cylinder dimensions would be used on other makes/ models perhaps probably same threading.
Will just keep trying.👍

[ZAKDINGEL]

You might find that the inside diameter is the same as the AA --im sure I read on here that somebody had used a AA cylinder on one look here http://www.airgunbbs.com/showthread....brocock+enigma

[Shed tuner]

OD thanks.

so the ID could indeed be the same 29mm AA thread...

[duomatic410]

You might find that the inside diameter is the same as the AA --im sure I read on here that somebody had used a AA cylinder on one look here http://www.airgunbbs.com/showthread....brocock+enigma

THanks for that, will borrow the son in laws 410 and check it out,👍

[ZAKDINGEL]

THanks for that, will borrow the son in laws 410 and check it out,👍

Please Keep us informed on the outcome

[duomatic410]

Please Keep us informed on the outcome

I will do that.👍

[duomatic410]

Have just tried a AA cylinder, threads the same, depth the same.
About 1/2 inch in length different (carbine) but as it's a free floating barrel don't see a problem.
Will order one to morrow 👍

[Shed tuner]

Have just tried a AA cylinder, threads the same, depth the same.
About 1/2 inch in length different (carbine) but as it's a free floating barrel don't see a problem.
Will order one to morrow 👍

Good to confirm, thanks...