Brockock enigma air tube.

[duomatic410]

Thanks gents.
Have somewhere an end from a 410 tube, and that's the problem, somewhere.
Have spent an hour discovering what I forgot I had but not that bit.
The enigma is 32 mm diameter.

[Shed tuner]

The enigma is 32 mm diameter.

OD or ID ?

[duomatic410]

OD thanks.

[AC all day]

I removed one a while ago as it became belled around one end, probably could cut it back and re use it, I think I got my replacement from Silco, but it was a couple of years ago.....

[duomatic410]

I removed one a while ago as it became belled around one end, probably could cut it back and re use it, I think I got my replacement from Silco, but it was a couple of years ago.....

This as belled,
Someone tried to put 300 bar into it for more power, and we all know what that causes.
Not heard of Silco?
Am sure the same cylinder dimensions would be used on other makes/ models perhaps probably same threading.
Will just keep trying.👍

[ZAKDINGEL]

You might find that the inside diameter is the same as the AA --im sure I read on here that somebody had used a AA cylinder on one look here http://www.airgunbbs.com/showthread....brocock+enigma

[duomatic410]

You might find that the inside diameter is the same as the AA --im sure I read on here that somebody had used a AA cylinder on one look here http://www.airgunbbs.com/showthread....brocock+enigma

THanks for that, will borrow the son in laws 410 and check it out,👍

[Shed tuner]

OD thanks.

so the ID could indeed be the same 29mm AA thread...