Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 39

Thread: Venom Mk1 TX200

  1. #16
    Join Date
    Dec 2010
    Location
    Halesworth
    Posts
    410
    Quote Originally Posted by les allam View Post
    I think Richard (Rikard) had a Venom Tx200 at one of the bashes,I had a couple of shots with it.
    Les..
    Afternoon Les hope you are keep well, yes I do have a MK1 TX200 Venom but mine has a shortened shrouded barrel and underlever, aluminium piston and set back gold plated trigger, incidentally I also have a std piston that has been converted by Venom to take the HW seal

  2. #17
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Quote Originally Posted by Rikard View Post
    Afternoon Les hope you are keep well, yes I do have a MK1 TX200 Venom but mine has a shortened shrouded barrel and underlever, aluminium piston and set back gold plated trigger, incidentally I also have a std piston that has been converted by Venom to take the HW seal
    Hi Richard
    I hope you are feeling well too.
    Your Venom Tx was a lovely gun and shot real nice.
    Les..

  3. #18
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by les allam View Post
    Hi Richard
    I hope you are feeling well too.
    Your Venom Tx was a lovely gun and shot real nice.
    Les..
    I don't think I saw that gun, Les. --- Perhaps I was busy flipping burgers.

    I should have guessed that Richard had one.

  4. #19
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Quote Originally Posted by T 20 View Post
    I don't think I saw that gun, Les. --- Perhaps I was busy flipping burgers.

    I should have guessed that Richard had one.
    Hello Mick
    You was probably busy doing something as usual, looking after us all.
    Yes Rikard does have some special guns.
    Les..

  5. #20
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by les allam View Post
    Hello Mick
    You was probably busy doing something as usual, looking after us all.
    Yes Rikard does have some special guns.
    Les..


    At least I can be happy in the knowledge that I own one of the guns shown in Zedman's Venomac advert, Les.











    Unfortunately it's a Daystate Sportsman MK2.





    All the best Mick

  6. #21
    Join Date
    Apr 2007
    Location
    Dudley
    Posts
    9,211

    Venom

    Funny enough I have the 95 with V1 silencer. Mach 1.5

  7. #22
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Quote Originally Posted by T 20 View Post
    At least I can be happy in the knowledge that I own one of the guns shown in Zedman's Venomac advert, Les.











    Unfortunately it's a Daystate Sportsman MK2.





    All the best Mick
    And very nice it is too,those double pumpers are a nice thing to have.
    Les..

  8. #23
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by les allam View Post
    And very nice it is too,those double pumpers are a nice thing to have.
    Les..
    I still prefer the Titan Mohawk, Les --- simpler to strip and service.

    And I was wrong about only having one gun off the advert, I have a 54 Airking as well --- it's like a FWB300 designed for the Hulk.

  9. #24
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,325
    Interestingly, I've just found a Venom TX piston in the spares collection. Ali body, steel nose, just over 150g all inc. Mk3 rod/stroke, and fitted with the green venom TX seal (larger lip groove). It's a bit light, but at mk2 stroke it would be fine. Not ideal at mk3 stroke though - I'll probably fit a nose extension to it, or a longer rod (which would add 10g).
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  10. #25
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Quote Originally Posted by T 20 View Post
    I still prefer the Titan Mohawk, Les --- simpler to strip and service.

    And I was wrong about only having one gun off the advert, I have a 54 Airking as well --- it's like a FWB300 designed for the Hulk.
    You have probably got a couple more if you have a proper look .
    Les.

  11. #26
    Join Date
    Jul 2006
    Location
    Ammanford
    Posts
    213
    Quote Originally Posted by Shed tuner View Post
    Interestingly, I've just found a Venom TX piston in the spares collection. Ali body, steel nose, just over 150g all inc. Mk3 rod/stroke, and fitted with the green venom TX seal (larger lip groove).
    Interesting, any chance of a photo?

    Rich.
    Rich. https://i.imgur.com/6sXOoGi.jpg my MPR's & mk1 TX200
    repeat Burris owner (now have 8)

  12. #27
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by Rikard View Post
    Afternoon Les hope you are keep well, yes I do have a MK1 TX200 Venom but mine has a shortened shrouded barrel and underlever, aluminium piston and set back gold plated trigger, incidentally I also have a std piston that has been converted by Venom to take the HW seal

    Richard's Pistons :-

    image.jpg

    image.jpg

    image.jpg

  13. #28
    Join Date
    Dec 2010
    Location
    Halesworth
    Posts
    410
    Thanks for that Mick, pictured is the one converted by Venom to take the HW seal, a std MK 1 and finally one that has been lightened

  14. #29
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,325
    Quote Originally Posted by zedman View Post
    Interesting, any chance of a photo?

    Rich.
    some pics. Nose is steel ahead of the front bearing ring, inserted into the ali body. So all the load bearing is steel, which is sensible.



    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  15. #30
    Join Date
    Jul 2006
    Location
    Ammanford
    Posts
    213
    Quote Originally Posted by T 20 View Post
    Richard's Pistons :-

    image.jpg

    image.jpg

    image.jpg
    Quote Originally Posted by Rikard View Post
    Thanks for that Mick, pictured is the one converted by Venom to take the HW seal, a std MK 1 and finally one that has been lightened
    Quote Originally Posted by Shed tuner View Post
    some pics. Nose is steel ahead of the front bearing ring, inserted into the ali body. So all the load bearing is steel, which is sensible.



    some interesting reference photo's there

    I'll see if I've time to strip my tx & get a photo of the piston, looks very much like the steel one with the brass adapter T 20 uploaded

    Rich.
    Rich. https://i.imgur.com/6sXOoGi.jpg my MPR's & mk1 TX200
    repeat Burris owner (now have 8)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •