Pro Sport cocking lever scuffing the stock

[Murphy]

I remember being able to centralise the arm by tightening and slackening the side stock bolts.

Check they are not too tight as this pulls the stock in from memory.

[where's it gone]

Have you taken the action off the stock lately ? I would do this and replace as the first port of call.

[Saxmaniac]

I bought a new AA Pro Sport that had a bent cocking lever from the factory, rubbing the stock like yours.

Shouldn’t have passed QC, but AA rectified it under warranty by fitting a new cocking lever and the block the lever attaches to.

All good now.