Everyone I have ever seen the ball bearings are proud.
Everyone I have ever seen the ball bearings are proud.
Master Debater
These balls are very slightly proud and the cone shaped centre bit is a bit loose
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....
it looks like your QD is broken / missing bits as there should be a release button and like Murphy says above the BB's should be out
Hmm annoying!
Thanks
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....
Inside there should a spring & a cone of either metal or plastic the spring pushes the cone up which forces the bearings out to engage in the socket, you could try penetrating oil in case it's a bit rusty or dirty inside.
I don't suppose there's a grub screw or circlip to disassemble it when you look in the hole in the bottom or do the two halfs unscrew ?
There is a cone but it doesn't move. I've tried using force as much as i dare in a vice. Could try WD40 I suppose. I did wonder if the cone is supposed to move.
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....
Cant see that it comes apart, no
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....