Results 1 to 4 of 4

Thread: Help needed with my uragan compact

  1. #1
    Join Date
    May 2012
    Location
    warminster
    Posts
    469

    Help needed with my uragan compact

    Hi all, I have a uragan compact that is low on power at around 10ft lbs with favoured pellets of jsp jumbo rs
    When I try to adjust the hammer spring even for a quarter turn and then test fire it fires the pellet but immediately after it dumps all the air from the bottle
    I’ve set it back to 10ftlb and no more dumping of air !!!
    Could someone suggest a fix ? Private message if need to ! Many thanks .

  2. #2
    Join Date
    May 2012
    Location
    warminster
    Posts
    469
    Tried again and all seems fine , adjusted Hammer spring and now getting around 11ftlbs
    Think I’d better leave it at that .

  3. #3
    Join Date
    Oct 2012
    Location
    preston
    Posts
    527
    Quote Originally Posted by nuggs View Post
    Hi all, I have a uragan compact that is low on power at around 10ft lbs with favoured pellets of jsp jumbo rs
    When I try to adjust the hammer spring even for a quarter turn and then test fire it fires the pellet but immediately after it dumps all the air from the bottle
    I’ve set it back to 10ftlb and no more dumping of air !!!
    Could someone suggest a fix ? Private message if need to ! Many thanks .
    It would only do that if you had very low pressure in the bottle.
    mk2 rapid.22

  4. #4
    Join Date
    Oct 2012
    Location
    preston
    Posts
    527
    Quote Originally Posted by nuggs View Post
    Tried again and all seems fine , adjusted Hammer spring and now getting around 11ftlbs
    Think I’d better leave it at that .
    You could have the hammer spring maxed out, the cure is allow the restrictor to flow more air, the adjustment is only a few thousands of an inch or 0.1 mm dont go mad. There should be info on the net on how to do it.
    mk2 rapid.22

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •