Bipod HELP!!!

[Bioarm]

Right, I bought myself a BSA R10 SE 4 weeks ago and I'm wanting to get a bipod for it. Only one I like the look of is the Atlas, unfortunately I don't have that kind of cash lying about after splashing out over £1k for the rifle, scope and other bits and bobs. Managed to find a FAKE Atlas style one on E-bay for £23 (yes, yes, I know it's not great, but it's all I can afford for now) but no idea on how to attach it to my rifle.
Does anyone have an idea what it is I need and have you already got one on your R10?

Cheers

Chris

[bighit]

do you have a Sling stud on the rifle ?

If you do then you could try one of these



The forum sponsor may sell them too . J.S Ramsbottom.


if you have the sling stud on the rifle you attach that adapter to it and then the bipod to the adapter


Or this that goes on the Bottle item number 283904490098 on E-bay but remember its plastic 3D printed .

[Bioarm]

do you have a Sling stud on the rifle ?

If you do then you need one of these



The forum sponsor may sell them too . J.S Ramsbottom.


if you have the sling stud on the rifle you attach that adapter to it and then the bipod to the adapter


Or this that goes on the Bottle item number 283904490098 on E-bay but remember its plastic 3D printed .

Yes I have a sling stud attached but if you posted a picture, nothing is there pal??

[bighit]

Yes I have a sling stud attached but if you posted a picture, nothing is there pal??

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

[Bioarm]

do you have a Sling stud on the rifle ?

If you do then you need one of these



The forum sponsor may sell them too . J.S Ramsbottom.


if you have the sling stud on the rifle you attach that adapter to it and then the bipod to the adapter


Or this that goes on the Bottle item number 283904490098 on E-bay but remember its plastic 3D printed .

Yes I have a sling stud attached but if you posted a picture, nothing is there pal??
Don't like the look of the one for bottle 🤔

[Bioarm]

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

That might just do the trick, cheers.

[aj]

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

My mate had one of those for an Atlas style bipod, but the locking bar on the bipod, when attached through the only slot on the adaptor would cause the base of the bipod to foul the locking collar. Could be rectified by grinding a bit of the bipod base away.

EDITED: The one my mate had was the single slot version, the multiple slot one would be fine.

[telbert]

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

I tried one of these on my R10 and it seems to work OK.

[Bioarm]

I tried one of these on my R10 and it seems to work OK.

Which one did you get, the 1 slot or 3?
Just looks to me that the 3 slot might be too long as the R10 has a curve at the front.

[angrybear]

Then you'll have to cut/file down the stock to make it fit

Harris also do a range of adaptors that clip on the front stud.

Or of course you could just buy a bipod with a stud clamp & fit it straight on

[Bioarm]

Then you'll have to cut/file down the stock to make it fit

Harris also do a range of adaptors that clip on the front stud.

Or of course you could just buy a bipod with a stud clamp & fit it straight on

Not a chance I'm doing anything to stock, rifle is only 4 week old 🤔😋
Will get it fitted some how.