Bipod HELP!!!

[bighit]

Yes I have a sling stud attached but if you posted a picture, nothing is there pal??

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

[Bioarm]

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

That might just do the trick, cheers.

[aj]

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

My mate had one of those for an Atlas style bipod, but the locking bar on the bipod, when attached through the only slot on the adaptor would cause the base of the bipod to foul the locking collar. Could be rectified by grinding a bit of the bipod base away.

EDITED: The one my mate had was the single slot version, the multiple slot one would be fine.

[telbert]

These may work https://www.ant-supplies.uk/rifle-bi...-rail-kit.html

I tried one of these on my R10 and it seems to work OK.

[Bioarm]

I tried one of these on my R10 and it seems to work OK.

Which one did you get, the 1 slot or 3?
Just looks to me that the 3 slot might be too long as the R10 has a curve at the front.

[angrybear]

Then you'll have to cut/file down the stock to make it fit

Harris also do a range of adaptors that clip on the front stud.

Or of course you could just buy a bipod with a stud clamp & fit it straight on

[Bioarm]

Then you'll have to cut/file down the stock to make it fit

Harris also do a range of adaptors that clip on the front stud.

Or of course you could just buy a bipod with a stud clamp & fit it straight on

Not a chance I'm doing anything to stock, rifle is only 4 week old 🤔😋
Will get it fitted some how.