BSA R10 problem

[danam1]

Morning all,
I’ve got my mates R10 to look at for him because he got a pellet stuck in the barrel.
I managed to get it out and then tried to put a couple through it but the same thing happened again after a couple of shots.
I thought perhaps the the pressure gauge on the riffle might be faulty, so I charged it up just to be sure but the same problem persisted.
I’m now wondering if the regulator could be faulty?
Any help will be greatly appreciated.
Danny

[MARSH]

Sounds like the reg best thing to do is fit a Huma reg

[danam1]

Sounds like the reg best thing to do is fit a Huma reg

Nice one, thanks for that.
Is there anyway of testing the old reg to make sure it is that that’s faulty?

[PCPShooter]

It’ll be the reg
Best option John Bowkett non mechanical reg upgrade 👍

[danam1]

It’ll be the reg
Best option John Bowkett non mechanical reg upgrade 👍

Thanks for that.
Can these be fitted yourself like the Huma ones or do they have to be sent away to be done?

[mark410]

Thanks for that.
Can these be fitted yourself like the Huma ones or do they have to be sent away to be done?

This needs to be sent to John Bowkett, the Huma is self fitting. Have you got access to a chrony? Tell you straight away if it's the reg.

Mark