Results 1 to 13 of 13

Thread: Webley mk3 Smoothbore

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2020
    Location
    Bury st edmunds
    Posts
    14

    Webley mk3 Smoothbore

    Hi all, I’m new to this Forum.
    Just in the process of restoring a mk3 and upon inspecting the barrel realised that in fact it’s a smoothbore and I have noticed that there is a letter ‘S’ stamped on the underside of the barrel.
    Have many of you knowledgeable lot come across this much before?

    Regards

    Matt

  2. #2
    Join Date
    Jan 2007
    Location
    near bolton
    Posts
    231
    Hi and welcome,
    The s stamp I had on a airsporter and I found out it was for export to Ireland.
    [url]www.rivington-riflemen.eu

  3. #3
    Join Date
    Jun 2000
    Location
    Basingstoke, U.K.
    Posts
    6,757
    Hi Matt,

    Welcome to the forum.

    Smoothbore Webleys were offered to markets where rifled arms were prohibited, even airguns. They are not that common, so you have done well finding one.

    John

  4. #4
    Join Date
    Jul 2020
    Location
    Bury st edmunds
    Posts
    14
    Thanks people.
    That’s interesting to hear. At first when I noticed I was a little disheartened as I am sure this will affect the accuracy? But I shall see how it performs, hopefully I’ll still be able to hit something!

  5. #5
    Join Date
    Jun 2000
    Location
    Basingstoke, U.K.
    Posts
    6,757
    Quote Originally Posted by mattwhit333 View Post
    Thanks people.
    That’s interesting to hear. At first when I noticed I was a little disheartened as I am sure this will affect the accuracy? But I shall see how it performs, hopefully I’ll still be able to hit something!
    Hi Matt,

    This has always intrigued me and if you are able to shoot some groups, I'd be interested in your results. I'm sure the accuracy will be acceptable at usual open sighted distances.

    Kind regards,

    John

  6. #6
    Join Date
    Jul 2020
    Location
    Bury st edmunds
    Posts
    14
    Hi John,

    I will certainly keep you updated. At the moment it’s in bits and bare metal. I was lucky enough to machine a new tap lever so all parts complete now.

    Fingers crossed

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •