Results 1 to 15 of 22

Thread: Mk4is power problem.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2012
    Location
    heswall
    Posts
    1,520

    Mk4is power problem.

    Run my mk 4 over my combro yesterday and it’s putting out about 9.8,would a duff battery cause this??

  2. #2
    Join Date
    Dec 2013
    Location
    chorley
    Posts
    505
    Have u checked the power settings mate

  3. #3
    Murphy is offline Cooee! Chase me you naughty boys!
    Join Date
    Aug 2003
    Location
    Wigan
    Posts
    22,388
    That's unusual.

    Electronic Daystates are normally over.

    They are the HW80 of PCP's.
    Master Debater

  4. #4
    Join Date
    Aug 2012
    Location
    heswall
    Posts
    1,520
    Quote Originally Posted by scoots View Post
    Have u checked the power settings mate
    Says hi power on info screen

  5. #5
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,449
    more likely crap/gunge on the hammer
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  6. #6
    Join Date
    Aug 2012
    Location
    heswall
    Posts
    1,520
    Just been doing a little research and battery can effect the power as does the 0 ring on the pellet probe.

  7. #7
    Join Date
    Dec 2013
    Location
    chorley
    Posts
    505
    I charge mine religiously once a month whether I've used it or not....start with a good charge n see how u go

  8. #8
    Join Date
    Dec 2013
    Location
    chorley
    Posts
    505
    Charge it for 16 hours and see what the voltage is once charged...it should also say ip voltage good when u plug it in, if it says anywhere over 7v when charged and it's still low on power then I'd suggest maybe a service...or a seal is needed.

  9. #9
    Join Date
    Aug 2012
    Location
    heswall
    Posts
    1,520
    Quote Originally Posted by scoots View Post
    Charge it for 16 hours and see what the voltage is once charged...it should also say ip voltage good when u plug it in, if it says anywhere over 7v when charged and it's still low on power then I'd suggest maybe a service...or a seal is needed.
    It does say that,what’s ip voltage?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •