have some berdan primed
if of use,
what they for,?
have some berdan primed
if of use,
what they for,?
Want to make up a .41 swiss inert. Berdan would be fine. How much do you want for a couple please.
Yeah. Just toying with the idea of putting it in ticket but wanted to see how much of a faff it is to make up ammo
You Cannot Reason People Out of Something They Were Not Reasoned Into
"Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby
HELLO,
been reading this with interest, as it is something i have been messing with for a while,
tried some of the Berdan 8mm and all failed, will try annealing them first, they are very old,
if i can get these to form, i was toying with drilling them for shot-gun primers,
made 41 SWISS from 348 Win no problem, .414 bullet, 45mm long case, some failures, but old cases that had mixed in with new,
made Vetterlli from new PPU 8mm Lebel, .432 bullet, 43mm long case,
made 10.5x47R from PPU new 8mm Lebel, .419 bullet, 48mm long case,
lost a 15 0f 40 B-Brass new, fire forming, lost only 3 out of 90 PPU new, using expander dies,
if i was you i would try with new cases first,
CDSG had bags of 50 in stock a while back,
GOOD LUCK
T