Evening
Does anyone know where I could get either a shroud or better still some 15mm diameter barrel weights for a HW99s? I know Tinbum and Konceptus used to make a shroud, but beyond that Google isn't really helping me. A bit more weight at the end would really help the rifle stay on aim.
Many thanks,
Jon
Last edited by Jon; 11-10-2020 at 08:26 PM. Reason: Typo
Hi you could try hull cartridge drop them a e mail
Jonny Neate makes a pretty good barrel weight. Not sure if he is currently making any though. If you get really desperate/adventurous then give me a shout and I may have some old stock HW99 barrel sleeves here. They would need polishing and bluing though.
ive just made 3 for my stingray and xocets.
basically i copied the one fitted to my tomahawk
Thanks everyone,
I've PM'd Jonny Neate and have my fingers crossed that he still makes them. Really appreciate the kind offer Captain Bongo, do the sleeves you have slip/tap on without damaging the barrel underneath?
I would get the slip on Weihrauch silencer but the gun looks disgustingly long with it on :/
I put a prosystem silencer on mine it works spot on and flip has gone
Tip - You need about 15.3 bore to go over the foresight rails which are slightly proud.
I made something similar from alloy as barrel finisher, it secures with a small grub screw which would leave a small mark should it be removed.
I had mine powder coated being alloy, but making it from steel to make a weight would allow you get it nicely blued.