Results 1 to 15 of 20

Thread: Sheridan C9 Blue Streak

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2017
    Location
    Holmfirth
    Posts
    249

    Sheridan C9 Blue Streak

    So the next project has turned up unexpectedly. Doing some work near my folks and my Dad asked me to drop by. They're clearing house trying to get ready for a pre-xmas move ( circumstances permitting ) and this has ended up with me. Purchased new by him somewhere around mid - late 80's for us to use as teenagers. Was shot a lot when new but probably only had occasional outings for the last two decades. Always stored with two pumps in it but apparently the bolt is getting a bit stiff to cock now. Should satisfy my curiosity and urge to tinker with stuff for a few weeks.

    http://imgur.com/a/nAK9UEx
    Be good. And if you can't be good, be good at being bad.

  2. #2
    Join Date
    May 2010
    Location
    Bamber Bridge
    Posts
    1,284
    You lucky man that is a beautiful rifle.

  3. #3
    Join Date
    Dec 2012
    Location
    Harlington
    Posts
    8
    Yes, nice early Sheridan CB9.probably 1991 manufactured in Benjamin's Racine factory, pre Crosman take over.

  4. #4
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,068
    they were made after crosmans take over i think as well up to about 93-94 but they were the best of the c9's imo

  5. #5
    Join Date
    Jun 2006
    Location
    mansfield
    Posts
    1,634

    blue streak

    when where these first made, ime 74 and sure i had one in my teens, cheers ray

  6. #6
    Join Date
    Dec 2017
    Location
    Holmfirth
    Posts
    249
    Managed to snatch a quick go and took a few goes to get it zeroed. My dad is a proper lefty but I shoot righty, and he'd been shooting 20m not 30m. Bolt was quite stiff but not binding and pretty smooth. Still cocks and shoots well on 6 pumps. My excuses for the last five shots strung horizontally across the middle are the weather, a trigger that's heavier than I'm used to, a scope that's parallaxed for 100yds, weather again and really poor quality jsb exact pellets ( more excuses to follow when I can think of them )

    http://imgur.com/a/VedUcCU

    Wood needs tidying up and the forend on the pump arm is not sat right so the metalwork inside may be warped slightly but nothing that cant be fixed I'm sure. It makes a right crack though, quite at odds with the complete lack of movement!
    Be good. And if you can't be good, be good at being bad.

  7. #7
    Join Date
    Sep 2010
    Location
    Bruton
    Posts
    6,593
    Quote Originally Posted by pigeonbasher1 View Post
    when where these first made, ime 74 and sure i had one in my teens, cheers ray
    The Sheridan was introduced in the US in 1947, first the model A and then the model B. The A in particular is arguably the highest-quality factory multi-pump ever made.

    The nickel model C arrived in 1949 and the blued one in 1952. Small numbers came into the U.K. until the 12 ft-lbs limit was introduced in 1968 (the Sheridan typically made 14 ft-lbs on eight pumps).

    Sussex Armoury started importing them again from the late 70s or very early 80s, with the hammer springs chopped to keep them legal by not exhausting all the air in one shot.

    Later imports I think were more sophisticated, using a blow-off valve or similar to regulate power. They were fairly widely available, including through the OP’s CB9 series and to some extent the final C9As, though I don’t think huge numbers were sold as they were competing with things like HW springers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •