I have not admitted defeat but ..... stripping a BSA Superstar no real problem especially as I used Pete Evand AGW guide. All now done but the trigger assembly has me puzzled. In Pete's article he showed the various pins to remove in order to get the sear out of the way to allow the piston to come out ..... OK OK I now know this was not necessary but I did try depressing the sear but got nowhere. Maybe I pressed in the wrong place (). But even though Pete shows a diagram of the bits and even mentioned one pin holding the two springs, he did not give advice on reassembly.

Sp ... does anyone have a reassembly guide ... BSAOG is no more .... or notes to help me put the bits back together. I may be getting there slowly but have spent more time than I expected on this and a little advice would be welcome.
I also searched for Supersport trigger but found nothing terribly helpful.

All help appreciated,
Cheers, Phil