-
New spring arrived today the seller sent me
DIANA / ORIGINAL 27 19 13 3 245 Ox
Instead of the cobham one I mentioned earlier
I stripped the rifle put new spring in it was flush
With the end of cylinder so the length of the trigger mechanism to preload it about
2” at a guess
Now the fun starts I had an old drift pin knocking about so cut that to hold the two parts of the trigger block back retaining the smaller soft spring with this in place old jumper over the barrel and pushed down then drifted the proper pin through easier said than done didn’t change piston seal yet
With old spring was doing 450fps 8.44gn
New spring doing 620fps 8.44gn
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules