Results 1 to 11 of 11

Thread: Frank Burridge Hunter ?

  1. #1
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559

    Frank Burridge Hunter ?

    Following on from 45Flint regarding carving on airgun stocks.
    Does anyone remember the Frank Burridge hunter (probably the wrong name) with carved bunny squirrel or some other type of airgun quarry carved into the stock??. The name and carving seemed to wring a bell.
    It would have been in the 80s.
    Regards,Les old and confused ldgrin.

  2. #2
    Join Date
    Mar 2003
    Location
    Pontypridd South Wales uk
    Posts
    1,848
    Hiya.
    The model designation rings a bell but I cannot recall the stock carving.
    I do recall the Rod Lynton specials ( were they special field and special target)? These had a carving of quarry on one side of the stock. They were based on the HW80 not that long after they were introduced.
    In all the years I've only seen one in the flesh.
    Dave

  3. #3
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Quote Originally Posted by jonnyone View Post
    Hiya.
    The model designation rings a bell but I cannot recall the stock carving.
    I do recall the Rod Lynton specials ( were they special field and special target)? These had a carving of quarry on one side of the stock. They were based on the HW80 not that long after they were introduced.
    In all the years I've only seen one in the flesh.
    Dave
    Hi Dave
    I think you are right regarding Rod Lynton doing the carving thing.
    I vaguely remember a Webley Vulcan being done as well. The Frank Burridge name might not be related?.
    I will have to look through some of my early AGW magazines.
    I am glad I am not the only one who remember’s.
    Atb
    Les..

  4. #4
    Join Date
    Feb 2012
    Location
    Beith
    Posts
    1,147
    I remember the stocks Rod offered on Vulcans HW's etc. I seem to remember there wasn't much carving, more of an applied picture with an acrylic type material he called stippling. I had a stock for an Original 45 refinished with the strange applied stipple coating to the pistol grip. He also (or rather his stockmaker) shaped the pistol grip for a right hander and fitted a small palm shelf. I bumped into him at an FT shoot later in the year and quizzed him
    "how did you know I was right handed?"
    Last edited by Big Seth; 25-11-2020 at 07:51 PM.

  5. #5
    Join Date
    Dec 2008
    Location
    Darlington
    Posts
    582
    I think it was a tuned version of a webley Vulcan they used to have a gunshop near York

  6. #6
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Thanks for the info chaps.
    It was a distant memory for me.
    Les..

  7. #7
    Join Date
    Jan 2001
    Location
    york uk
    Posts
    189
    It was a Angling and gun shop on Holgate Road in York that did the Franks Burridge hunter, and I think it was a tuned version of the Webley Victor not the Vulcan. I do have a old Airgunner Magazine with a test of it in so will dig it out and check.

  8. #8
    Join Date
    Apr 2006
    Location
    Maylandsea Chelmsford Essex
    Posts
    3,559
    Cheers Rob
    I remember reading about the Franks Burridge hunter article in one of the magazines.
    Les..

  9. #9
    Join Date
    Jun 2013
    Location
    Sheffield
    Posts
    1,960
    I thought it was the C1 , may be it was both.

  10. #10
    Join Date
    Dec 2008
    Location
    Darlington
    Posts
    582
    Was the victor,vulcan and c1 the same action?

  11. #11
    Join Date
    Jun 2013
    Location
    Sheffield
    Posts
    1,960
    All same action , the Victor has no safety catch & shorter spring .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •