Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Robin h of crombo chrono

  1. #1
    Join Date
    Apr 2005
    Location
    Toddington
    Posts
    728

    Robin h of crombo chrono

    Combro ....Any one heard from robin lately..
    Iv been trying to contact him by phone and e mail but no luck.

  2. #2
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,777
    Have you tried a PM ?
    last I heard Combro had closed, which was why the prices for used units had gone stupid.

  3. #3
    Join Date
    Apr 2005
    Location
    Toddington
    Posts
    728
    Thanks. I have sent him a pm on this forum

  4. #4
    Antoni's Avatar
    Antoni is offline There's nothing cushy about life in the Women's Auxiliary Balloon Corps!
    Join Date
    Mar 2011
    Location
    Mansfield
    Posts
    2,036
    Quote Originally Posted by angrybear View Post
    .....Combro had closed, which was why the prices for used units had gone stupid.
    Which is odd when you consider that a very significant reason for their value and utility is the legendary support from Robin when they "cease to operate".
    P1V1overT1=P2V2overT2

  5. #5
    Join Date
    Dec 2003
    Location
    Yeovil/Moreton in Marsh
    Posts
    12,908
    It may be a parts sourcing issue. I know they have had trouble with sourcing parts that are niche and possibly low volume. The small chrono market is a busy place nowadays too.
    In a battle of wits I refuse to engage with an unarmed person.
    To one shot one kill, you need to seek the S. Kill only comes from Skill

  6. #6
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    http://www.airgunbbs.com/showthread....ghlight=combro

    Post 24 . Robin gives the reason there.

  7. #7
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,696
    Last time I tried to use mine it gave an error that the manual said I needed to clean the battery contacts, I tried several times but it wouldn't work


    John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  8. #8
    Antoni's Avatar
    Antoni is offline There's nothing cushy about life in the Women's Auxiliary Balloon Corps!
    Join Date
    Mar 2011
    Location
    Mansfield
    Posts
    2,036
    Quote Originally Posted by johnbaz View Post
    Last time I tried to use mine it gave an error that the manual said I needed to clean the battery contacts...
    The design relies on four stacked cells. Certainly when I had my Combro it would come back into operation after I'd taken the cells out and rubbed each side hard on the carpet. That's eight rubs. Any battery technology involves chemicals and they always seem to find their way outside of where they're meant to be. Corrosion, high resistance contacts or worse is the result. These pieces of kit are often stored for months or years between being used and that makes this situation worse.

    Clean the cells and give the printed circuit board battery contact points a gentle 'polish'.
    P1V1overT1=P2V2overT2

  9. #9
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by johnbaz View Post
    Last time I tried to use mine it gave an error that the manual said I needed to clean the battery contacts, I tried several times but it wouldn't work


    John
    Was that before or after you shot it, John ?

  10. #10
    Join Date
    May 2011
    Location
    North Yorkshire
    Posts
    1,520
    I’ve got one,might have to put it up for sale and start a bidding war

  11. #11
    Join Date
    Apr 2005
    Location
    Toddington
    Posts
    728
    All sorted thank you robin
    Atb
    Last edited by b.b; 11-12-2020 at 02:03 PM.

  12. #12
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,696

    Thumbs up

    Quote Originally Posted by T 20 View Post
    Was that before or after you shot it, John ?


    It was after Mick!, It had already been back to Robin after I sent down the garden at speed!!


    I've only ever shot two Chrono's! (And my own finger!! )


    John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  13. #13
    Join Date
    Dec 2020
    Location
    Hastings
    Posts
    38

    alternatives

    Not pitting down the Crombo, but there are other cheaper alternatives. I tried to get one, but as someone said, he's hasn't got the parts. So I ordered HT-X3000 from amazon, was about £27 and works really well. Has good reviews round the web, so bit hard to compete with this price point?

  14. #14
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by johnbaz View Post
    It was after Mick!, It had already been back to Robin after I sent down the garden at speed!!


    I've only ever shot two Chrono's! (And my own finger!! )


    John

    If you've never shot a Chrono, then you're not trying hard enough.

  15. #15
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,696

    Thumbs up

    Quote Originally Posted by T 20 View Post
    If you've never shot a Chrono, then you're not trying hard enough.
    Ha ha ha ha!!


    John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •