bsa ultra mod

[leadpig]

i have just put a scorpion cylinder on my ultra ( cheers @trumpetier ) and the hw mod wont fit even though someone said it would lol, nor will the ase, they are about 1-2mm to big diameter wise. i have a old ph one that fits but its rusty and looks poo
what mods are people using or should i go shrouded barrel
tia dave

[les allam]

I put a JLS stalker silencer on my Ultra se with 320mm cylinder fitted.
It’s smaller diameter was just right on my gun.
Atb
Les..

[247sniper]

Have you tried screwing a coke bottle onto the end!

[angrybear]

Repaint the PH

[leadpig]

Repaint the PH

i would but it will need a lot of attention first its orange lol, and to be honest i cant remember if it was any good to begin with it was on a cz 511 iirc, must be 12 years since i used it

[PCPShooter]

i have just put a scorpion cylinder on my ultra ( cheers @trumpetier ) and the hw mod wont fit even though someone said it would lol, nor will the ase, they are about 1-2mm to big diameter wise. i have a old ph one that fits but its rusty and looks poo
what mods are people using or should i go shrouded barrel
tia dave

a ph with custom baffles would be my suggestion, and you already have one, easy enough to spray or paint too

[Strimmer]

Ive just bought a ultra se, I put on a sak, looked too fat, put on a hw, too long, so have gone down the shroud option. It's effective but about the same length as the sak on, so I've just ordered a 350mm cylinder to bring both flush.

[nick-nic]

how about using a Best Fittings adaptor https://www.bestfittings.co.uk/shop/...nodized-alloy/

[Strimmer]

Ive just bought a ultra se, I put on a sak, looked too fat, put on a hw, too long, so have gone down the shroud option. It's effective but about the same length as the sak on, so I've just ordered a 350mm cylinder to bring both flush.

And that didn't work, the shroud is about 5mm longer and drooping onto the cylinder. Rethink is needed

[leadpig]

Repaint the PH

which is the option im going with, i got most of the surface rust off and my m8 said he would clean the rest and spray it at work
will have to do for now