Prosport question

[al308]

Hi i have a new to me prosport,the end of the barrel has an internal thread,but the cap is missing,does anyone know where i could source one? i have looked at the usual spares places,but the exploded diagrams do not show this part,is it a standard fitment?
Thanks

[TonyL]

If not available from the usual spares suppliers, maybe worth trying Air Arms directly?

[al308]

Will do thanks tony,so the internal thread is standard on the prosport?is there a specific name for the part? end cap?,thread protector?

[IanU]

Does the AA TX HC screw-in plenum insert fit the Prosport?

[draconis]

As far as I know, the prosport has never had a threaded end, maybe a previous owner removed the original end plug and baffles, so they could thread it for a silencer.

[Weasle]

As far as I know, the prosport has never had a threaded end, maybe a previous owner removed the original end plug and baffles, so they could thread it for a silencer.

I would agree - I've just had a look at mine.

The inside of the shroud is plain, with the end baffle inset about 3mm down.... If I could send a photo I would - however I've never succeeded with that process

Cheers Steve

[al308]

Thanks for the reply guys, so maybe I should start looking for a silencer

[Murphy]

Maybe somebody put the HC shroud on a PS.

[Shed tuner]

yeah, sounds like a modification - not a bad one either if done accurately. Just find a compact male threaded silencer.

[al308]

Just had a reply from air arms, they seem to think I have lost a baffle and have asked for a photo, so will do and see what they say

[rapidresponse1]

hope you get it sorted bud

[look no hands]

I replaced my shroud a couple of years ago and there was no thread on the old one or the new one, I seem to remember there are 5 baffles in the end.

Pete