Results 1 to 9 of 9

Thread: P/T Won't Cock

  1. #1
    Join Date
    Mar 2002
    Location
    South Elmsall
    Posts
    4,283

    Question P/T Won't Cock

    Out today with my Pro Target. After about 50 pell's, cocked it loaded it closed it pulled the trigger, nothing

    Tried to cock it again, it won't. Pulled trigger tried again, nope, it won't cock the trigger.

    I've tried umpteen times, it won't cock.

    Tried all the trigger adjustments, nope.

    I'm guessing the sear's worn.

    Any other Ideas?

    Ray
    Last edited by Ray J; 31-10-2005 at 03:46 AM.

  2. #2
    Join Date
    Jun 2003
    Location
    WEST YORKSHIRE (Allerton Bywater)
    Posts
    2,007
    Did you remember to get that pellet out Ray ?

  3. #3
    Join Date
    Mar 2002
    Location
    South Elmsall
    Posts
    4,283
    Quote Originally Posted by paul.s
    Did you remember to get that pellet out Ray ?
    Nope! it's still in. I'll do it tomorrow.

    I needed to chat with Sam Smith

    Ray

  4. #4
    Join Date
    Jun 2000
    Location
    Northern Ireland.
    Posts
    1,871
    If you've tried the trigger adjustment route then I'd say it's a worn sear. Simple enough to replace. 5 minute job. From memory I think they're about £20 from AA.

    HTH,

    Jonathan.

  5. #5
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,324
    Jus take off the trigger sideplate, it'll be pretty obvious what's occuring...
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  6. #6
    Join Date
    Mar 2002
    Location
    South Elmsall
    Posts
    4,283
    Quote Originally Posted by paul.s
    Did you remember to get that pellet out Ray ?
    Gorrit now. I just pushed my Logun pull through wire down and it popped out.

    Ray

  7. #7
    LouisCorney Guest

    I refer the honourable gentleman...

    ... to my previous thread

  8. #8
    Join Date
    Mar 2002
    Location
    South Elmsall
    Posts
    4,283
    It's not been difficult to cock in any way. It just stopped.

    I've ordered a top sear. There did appear to be a shallow grooove in it.

    Hope I've got it right

    Ray

  9. #9
    Join Date
    Mar 2002
    Location
    South Elmsall
    Posts
    4,283
    Job done, a new top sear. It's only tiny the wear in the old one.

    £26 now Jonathan, still a 5 minute job though.

    Ray

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •