0.173 (4.4mm) BB's - Just to be awkward !

[SALTSCAR]

Hi Guys, further to earlier post on my Haenel Sportsmodell 49a repeater. This will be sold in the future but I am hoping to shoot it 1st. The problem lies in the ammo size. 0.173 (4.4mm) BB's, I have been told standard .177's are no good & all i've found so far are a listing with "Diana Oktoberfest copper coated BB's Calibre 4.4/ .173 bullet shaped lead balls" in Germany and even they are out of stock. anyone got similar gun?

[Jerry Cornelius]

Protek will sort you out: http://www.proteksupplies.co.uk/airgun-pellets.html

You need cz number 9 balls. If you just want a few and are not in a hurry pm me your address and I’ll pop 40-50 in an envelope for you. I get them from Germany and to make the postage make sense I get quite a lot at once.

[ptdunk]

For the record H&N exite smart shot bb’s have 4.5/.177 written on the tin but are in fact 4.4mm copper coated lead balls that work very well in the Heanel repeaters.

https://www.jsramsbottom.com/h-n-exc...s-177-750.html

Matt

[SALTSCAR]

Hi, I had emailed Ramsbottom's and they replied --"Hi, sorry non of the BB's we have will suit - customers with your air
rifle have tried all the BB's we stock in the past with no success."

[ptdunk]

Hi, I had emailed Ramsbottom's and they replied --"Hi, sorry non of the BB's we have will suit - customers with your air
rifle have tried all the BB's we stock in the past with no success."

Strange, I use the H&N exite in my Haenel 33 and my mate uses them in his Haenel 49a and they work fine. (Both have same mechanism)

I just measured 3 H&N exite from ramsbottom at

4.3mm
4.29mm
4.32mm

Then 3 from the recommended H&N ones I bought from Protek

4.26mm
4.25mm
4.23mm

Did a few more and the ones from Protek average at 4.26mm and H&N exite at 4.3mm

Both cycle and shoot perfectly, I’ll check if it makes a difference on the chrono tomorrow.

Cheers,
Matt

[ccdjg]

I found exactly the same as Matt with the H & N Exite from Ramsbottom with my repro' Haenel 250 pistol - they are 4.3 mm, contrary to what it says on the tin, and work perfectly with the original vintage magazines I sourced for the gun. The Protek balls were just that bit too small and sometimes rolled out of the barrel.