pcp pump for under a fiver!!

[oldboyshooter]

Next day delivery free if marked up as prime,
Loads of free videos on the prime app , Some are at a cost, also free music movies , TV shows and audio books,
Some may include a charge.

Ok thanks , my pump order said 2 weeks, so I think did not tick box , cheers

[derekm]

It can't be any good can it? It's not expensive enough

Seriously, it's tubing, concentric pistons and probably ball valves. Is it complex manufacturing from an engineering point of view? I think not.

Be sure to get a filter/dryer before using it though.

[Sir_SwampThing]

Ok thanks , my pump order said 2 weeks, so I think did not tick box , cheers

Double check your order because if you havent ticked the box to decline the Prime offer, you have almost certainly been signed up.


Atb
Chris

[oldboyshooter]

Double check your order because if you havent ticked the box to decline the Prime offer, you have almost certainly been signed up.


Atb
Chris

Hello Chris , thanks, I checked on account and nothing mentioned I now have prime , I will keep an eye on this just in case, cheers

[oldboyshooter]

Hello, how are forum members finding these pumps?? are the connectors suitable for your fill probes ??? I found that the Kwik fit are not the same as best fittings and the threads are all metric, I have an adapter coming to screw into pump hose and take a 1/8 BSP thread, which are most fill probes we use except maybe a chinese PCP,

[madcarlos]

Hello, how are forum members finding these pumps?? are the connectors suitable for your fill probes ??? I found that the Kwik fit are not the same as best fittings and the threads are all metric, I have an adapter coming to screw into pump hose and take a 1/8 BSP thread, which are most fill probes we use except maybe a chinese PCP,

Mine is the daystate/quick connector type, My best fittings adapters fits mine great, I filled a 200 cc bottle up very quick compared to the other pumps I've used in the past, Normally you get to about 150 bar then it's like trying to dig an hole with a space hopper, This did get harder as more air went in but it filled rather quickly, I was quite surprised how well it worked,

[I. J.]

Mine is the daystate/quick connector type, My best fittings adapters fits mine great, I filled a 200 cc bottle up very quick compared to the other pumps I've used in the past, Normally you get to about 150 bar then it's like trying to dig an hole with a space hopper, This did get harder as more air went in but it filled rather quickly, I was quite surprised how well it worked,

Best description of the week !

My connector just fitted straight onto my Best Fitting male connector. Happy bunny.

[madcarlos]

Best description of the week !

My connector just fitted straight onto my Best Fitting male connector. Happy bunny.

Loved my space hopper as a kid even though I went head first in an open fire as a kid, They don't make them now like they used to,

[colin g]

Hello, how are forum members finding these pumps?? are the connectors suitable for your fill probes ??? I found that the Kwik fit are not the same as best fittings and the threads are all metric, I have an adapter coming to screw into pump hose and take a 1/8 BSP thread, which are most fill probes we use except maybe a chinese PCP,

Pretty sure that all the Chinese pumps and things are metric unless stated bsp thread size as some do but like you say there are adaptors out there that are compatible but will probably cost more than this pump itself but as all my fill probes are quick fit then i have no problem with the supplied fittings and i do like the quick fit tyre inflator. Put a adaptor or moisture trap at the base of the pump and use any hose fittings you already have,,

[HW777]

Pretty sure that all the Chinese pumps and things are metric unless stated bsp thread size as some do but like you say there are adaptors out there that are compatible but will probably cost more than this pump itself but as all my fill probes are quick fit then i have no problem with the supplied fittings and i do like the quick fit tyre inflator. Put a adaptor or moisture trap at the base of the pump and use any hose fittings you already have,,

When it comes to using this pump, I am going to need advice, I don't have a clue what adaptors I will be needing.

Main stay pcp's are my focus and air arms does seem to be the best port of call atm, I can't be doing with change this and replace that type of rifles.

[colin g]

When it comes to using this pump, I am going to need advice, I don't have a clue what adaptors I will be needing.

Main stay pcp's are my focus and air arms does seem to be the best port of call atm, I can't be doing with change this and replace that type of rifles.

The adaptor will change the M8, M10 or whatever metric Thread you have to 1/8 bsp that is the standard fittings an a pcp rifle,, If You already have the pump then you may only need the 1/8 bsp quick fill male foster fitting for your probe then it clicks straight into your pumps quick connector.
auction site item number:283864980702 for instance. You can even buy the fill probe for your pcp already made with the foster fitting.
I dont know of anyone who uses spanners to fill their various pcp guns any more,, Especially the guys with lots of rifles as the pcp fill probes are different, Just click in the fill probe for your rifle of your choice and away you go.. I have lots of different probes so quick change is the way to go or muck about with a couple of spanners every time you want change a fill probe. You can get a bag full of foster fittings from china for next to nowt these days.