Sharp Innova II info. please

[deejayuu]

Thanks for looking.
Can anyone show a photo of trigger/sear parts laid out please. Picked a wreck up and missing bolt/catch/spring etc but no idea about the rest.
Trigger blade is present and the plate above it

[landymick]

Should be a block , spring & a “L “. Shaped plate IIRC .

[I. J.]

HTH
Ian

[deejayuu]

Thanks both. Really need a real parts photo tho'.

[MartynB]

Should be a block , spring & a “L “. Shaped plate IIRC .

Think you are right, oblong block with a hole for valve to go (possibly rubber bung in block hole), the plate is what the block 'slides' against and is toward the back of the rifle and block is sprung

[--ped--]

early ones had a big square block but later ones used the L plate found on Aces

[MartynB]

early ones had a big square block but later ones used the L plate found on Aces

I wasn't aware of that, I had both versions and am sure they both had a block

[robs5230]

Jules, I've messaged you some pics on the "other one"
Rob

[jirushi]

Hope this helps.
Cheers, Louis

[deejayuu]

Hope this helps.
Cheers, Louis

Great image. Many thanks.

[deejayuu]

A quick, pleasing for me, update. The sear and plate were absolutely jammed in the receiver having swollen due to rust build up. On and up now.

[ratbuster2240]

The same thing happened with my mk1, after 40 years the grease had cemented itself in there. It took some effort prying it out without damaging the breech. It must make a difference to the trigger pull?