Which AA Snap connector??

[scgevans]

OK this should be easy (is it ever... )

I need a couple of AA male parts to screw into the two probes I have for my Spitfire HF and Logun MkII so I can fill from a bottle already fitted with the (older) AA female snap connector

On the BAR website though they are listing TWO different AA male parts for the 400's and one for the 200 - yet I fill both of these rifles happily from the same bottle now.

http://www.airgunbuyer.com/Showprodu...%20Accessories

So is one a 'new' AA Snap (all my rifles are a couple of years old) and if so do I need the S200 'screw in' male part or the 16 or 17 mil AA 400 male bit???

I have measured the diameter of the exterior of the inner collar on the female part and it is 16mm, 14mm interior diameter.

I know I should just phone Lloyd but I don't get time to think during the day.

Cheers

Stu

PS - there are so many innuendo opportunities above it really isn't worth it..

[SNAKEBITE]

PS - there are so many innuendo opportunities above it really isn't worth it..

Don't spoil my fun.

[airgunner2388]

Phone BAR and talk to them they will help you. And it don't take long just take a shorter coffee break.

[Raygun]

I think that you may need what BAR have listed as Female parts.

The 1/8 bsp female thread and the male "probe". They will or should push into your quick release.

ATB
Ray.

[scgevans]

Ok as I have confused everyone else as well I shall have an imaginary coffee break (I remember those from years ago..) and phone BAR tomorrow.

Cheers

Stu

[Snapshot]

I'm not at all sure it matter which you get when they're not used on the guns themselves. I've got AA males with two or three different o/d's and they all work perfectly as adapters.

Ray, you've got it completely backwards.

Jonathan

[scgevans]

Jonathon - I should have asked you before - I think you posted on this last time I tried to get it sorted - months later here I am.

I'll still call BAR tomorrow - I just never seem to remember during the day.

Cheers

Stu