Good evening all, i was wondering if any of our fine members could help me? I'm trying to find out which plug/connector i need for the USB cable to attach to my Combro? any info would be most appreciated.
Good evening all, i was wondering if any of our fine members could help me? I'm trying to find out which plug/connector i need for the USB cable to attach to my Combro? any info would be most appreciated.
You need a serial to USB converter BUT from the Combro website:
"Why don't you sell the interface cable? When PC's stopped having serial ports our cable worked for a while with a USB to serial adapter. Then the Chinese reinvented RS232 shorting the negative rail to ground. Our cable will work with the more expensive FTDI chip set adapters. There is a theory that the Chinese TTL adapter will work directly with cb-625 if you connect cable SIN to chrono 6V and cable GND to chrono SOUT. I have bought adaptors to test this theory, if I ever get one that is actually recognised by my PC as a USB device, "dee-dum", I will test the theory. "
True freedom includes the freedom to make mistakes or do foolish things and bear the consequences.
TANSTAAFL
Thanks for the info, sorry i should have been a bit more clear, i have the data cable i just need to replace the connector that goes into the Combro as i managed to break it
Micro JST ?
[IMG] image hosting free[/IMG]
I use the blueshot cable and app on mine, makes the combro so much better.
It's this plug
https://uk.rs-online.com/web/p/wire-...plugs/6813341/
As seen here
https://www.co2air.de/thema/105253-c...o-geht%C2%B4s/
Translated.
A 3-pin socket contact with the specification Harwin 2mm M22-3010300, or you can carve the part out of an old 2.5 "IDE hard disk connection cable!
Last edited by bighit; 14-04-2021 at 11:20 PM.