nice condition tempest barrel for cheap wanted ...not fussy on calibre

[edbear2]

Bear in mind that Knibbs will only be able to post to a RFD which will bump the overall price up considerably.

Kindest regards

Barrel

How did we get to such a state of stupidity for a bit of tube

ATB, Ed

[WebleyWombler]

Or you could get some nice kind engineer to turn you down a bit of scrap rifle barrel to 10.56mm diameter and angle the face of one end at 6 degrees. From that face end, the fine flat knurling starts at about 16mm and lasts for about 50mm. needs to be about 170mm long so you can cut to length and crown to match your old barrel. easy enough to do and Tempest /Hurricanes work quite well in .20 if you can stand the cost of the pellets Fools a lot of people if they borrow it!

[barrel]

Or you could get some nice kind engineer to turn you down a bit of scrap rifle barrel to 10.56mm diameter and angle the face of one end at 6 degrees. From that face end, the fine flat knurling starts at about 16mm and lasts for about 50mm. needs to be about 170mm long so you can cut to length and crown to match your old barrel. easy enough to do and Tempest /Hurricanes work quite well in .20 if you can stand the cost of the pellets Fools a lot of people if they borrow it!

Could you be that engineer?.

Kindest regards

Barrel

[WebleyWombler]

Could you be that engineer?.

Kindest regards

Barrel

LOL, too many projects and not enough 'Good health' days to complete them in. Doing well ATM but it might not last. My reliability is similar to a politicians promises currently.

[urx]

Well i have a lathe so i might just also take a look at the ‘cut your own’ approach ....any barrels floating about unwanted?

[pnird]

Hi there:

I have a .22 Tempest barrel, unused, which is yours for £20 plus postage, (if you still need one!)

John

[barrel]

How did we get to such a state of stupidity for a bit of tube

ATB, Ed

Could be worse mate you could be living in Scotland.

Kindest regards

Barrel