Czs200

[BC312]

Been looking at the CZ S200 which looks a very nice compact air rifle with multi shot option if needed. Accuracy seems to be top notch. As for price i cant seem to see any on the secondhand market as of late only new so i cant see what the go for second hand, it seems this gun has been around for some time, not sure how far back, what do they average second hand?. I also noticed that some parts are plastic like the trigger and barrel cylinder support etc, do they do custom parts that can replace plastic. And finally i would like to silence it what options do i have for this. Any other pro and cons on this nice looking bit of kit

[Shedder]

I assume you are referring to the equivalent of the AA s200. They have very highly regarded barrels and the AA silencer is/was pretty good in my experience. I also like the AA 10 shot magazine system once it is set up right. The magazines are simple and easy to load. The down sides are the fact that there is no pressure gauge on the standard air cylinders and no safety catch. I think that the mk1 and mk2 had plastic bolt handles and they both have the two piece stocks, so don't have particularly good looks, but I think that is worth overlooking. Fairly low shot count - I think it is around 30 to 40 shots per fill from memory.
Should be better for spares and custom parts than many modern "budget" PCPs

[hawkeye]

I bought my mk3 as soon as they came on the market new as I prefer the look of the one piece stock and bought the moderator with it then fitted the
AA multi shot kit, it has been faultless and I love shooting it, reminds me of a biathlon type rifle, prices new have gone up dramatically and I assume the same for a good used example so its been a good investment imo.

[bighit]

Cz have stopped making them now sadly.

[hawkdriver]

I assume you are referring to the equivalent of the AA s200. They have very highly regarded barrels and the AA silencer is/was pretty good in my experience. I also like the AA 10 shot magazine system once it is set up right. The magazines are simple and easy to load. The down sides are the fact that there is no pressure gauge on the standard air cylinders and no safety catch. I think that the mk1 and mk2 had plastic bolt handles and they both have the two piece stocks, so don't have particularly good looks, but I think that is worth overlooking. Fairly low shot count - I think it is around 30 to 40 shots per fill from memory.
Should be better for spares and custom parts than many modern "budget" PCPs

The mk1 had a silver grey anodised aluminium bolt handle, the mk2 has a grey bendy plastic bolt handle, my mk1 is now 20 + years old, still shoots like a lazer, the mk1 s seem to have better triggers also.

[Farmerphil]

I bought a standard mk3 2 years ago and sent it to Ratworks tuning for Tench reg and quickfill with gauge etc, then I added a few quality mods myself including Rowan trigger blade, floated and shortened the barrel, custom Ratworks bolt handle, custom silencer and the list goes on
It will do 90 shots per fill at 11.5ft/lb with sub 5 fps spread using it's favourite JSB Exact RS and easily put them under a 5p at 40 meters

[rapidresponse1]

lovely guns they are

[BC312]

I forgot they were called the AA S200, most probably why i didn't see many on the second hand market when i was searching CZ S200. I must admit they are a nice small handy little rifle with the same punch as any other larger air rifle and accuracy hard to beat. Bit like he Falcon Fn19 light hunter i got light and handy but a bit limited on shots.