Get a set of TbT spring guides and that will be fine.
At a stretch maybe a new spring as well.
I have had some wonkey springs before but not quite as wonkey as that one.
Ade
Get a set of TbT spring guides and that will be fine.
At a stretch maybe a new spring as well.
I have had some wonkey springs before but not quite as wonkey as that one.
Ade
Shooting Air Rifles is like being a pubic hair on a toilet seat.
Eventually someone comes a long and P's you off.
They usually have a PCP
Cough --- Ox or Airforce Square section mainspring.
I'd also check for deformation of the cocking arm and bruising of metal on the piston. If the cocking arm is bent, you'll hear it grating along the outside of the spring during the cocking cycle.
Thanks for the correction there T20, getting my springs mixed up there. I'd like to take this opportunity to retract my previous statement re Titan being a nasty square section spring. 😁
Some of Mr. Tinbum guides are definitely on the list as is a new spring.
Be good. And if you can't be good, be good at being bad.
All good advice above. The 35's a wonderful classic rifle that still holds its head high today. And tough, too. With the appropriate parts checked and fitted, it'll be lovely again.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!
If it's making a noise like this it will be as CapitalBee has said.
http://imgur.com/a/2jBgU7U
You may need to unmute the video.
Nice 35 Luxus there, get a TBT kit, spring and fitted guides would be my advice.
Plinkerer and Tinkerer