HW35 maintenance

[CapitalBee]

I'd also check for deformation of the cocking arm and bruising of metal on the piston. If the cocking arm is bent, you'll hear it grating along the outside of the spring during the cocking cycle.

[charliemow13]

Thanks for the correction there T20, getting my springs mixed up there. I'd like to take this opportunity to retract my previous statement re Titan being a nasty square section spring. 😁

Some of Mr. Tinbum guides are definitely on the list as is a new spring.

[TonyL]

All good advice above. The 35's a wonderful classic rifle that still holds its head high today. And tough, too. With the appropriate parts checked and fitted, it'll be lovely again.

[gtfreight]

If it's making a noise like this it will be as CapitalBee has said.
http://imgur.com/a/2jBgU7U
You may need to unmute the video.

[maximus]

Nice 35 Luxus there, get a TBT kit, spring and fitted guides would be my advice.

[gtfreight]

Nice 35 Luxus there, get a TBT kit, spring and fitted guides would be my advice.

If that's me you're referring to, it has already got a TBT kit in it and it now shoots very sweetly after the cocking arm was replaced.
http://imgur.com/a/bENaSa3
The image is a bit dark and it doesn't help having a black garage door but that's the best picture I have.

[jjjohn]

What's the latest with the HW35 bud?

[maximus]

If that's me you're referring to, it has already got a TBT kit in it and it now shoots very sweetly after the cocking arm was replaced.
http://imgur.com/a/bENaSa3
The image is a bit dark and it doesn't help having a black garage door but that's the best picture I have.

Actually I was referring to the OP!