As always when selling any used item it all depends on a number of factors.
I might be over generous but maybe £100 more each?
No harm in trying, if you are going to sell them.
.22 flavour no idea on value I guess I’d say 100 for mk2 & 160 for mk1?
What sort of price range would you put them at?
Mk2 SN & finish on cocking lever worn off or possibly a replacement, there is what looks like letter D so I think it’s GD prefix
Mk1 SN is visible & is G prefix
Foresight hoods missing
Mk2 SN
As always when selling any used item it all depends on a number of factors.
I might be over generous but maybe £100 more each?
No harm in trying, if you are going to sell them.
I think you are about right, maybe more like £130 for the mk2 ?
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
The mk2 still has the nice stamped lettering on the barrel
I’ve also just found this period BSA 3-7x20 scope for the mk2, should increase value slightly
Last edited by Lee5159; 18-05-2021 at 01:41 PM.
I’m going to re black the trigger block & cocking lever on mk2
As the trigger block is zinc alloy I might try the Birchwood Casey aluminium black. Has anyone used it before, is it any good?
Today I thought I’d have a go at re doing the SN on the mk2. After checking with magnifying glass I could see the numbers was GD89744
I used a dremel with a diamond burr nail, I’ve never tried engraving metal before, I thought I’d give it a go
I think the results are not too bad for my first attempt
Before:
After:
Last edited by Lee5159; 19-05-2021 at 06:46 PM.