Results 1 to 6 of 6

Thread: Old flint lock Pistol

  1. #1
    Join Date
    Sep 2007
    Location
    Rugby
    Posts
    363

    Old flint lock Pistol

    Hi All , I have just bought my first flint lock and I have a question. Should it have half and full cock, this one appears to have a single cock at about where I might expect a half cock. Any ideas. Regards Daveh
    If you dont do it today, you might not be able to do it tomorrow!

  2. #2
    Join Date
    Apr 2009
    Location
    Bognor Regis
    Posts
    2,010
    Maybe a broken spring or it has moved from its proper position ?

  3. #3
    Join Date
    Jun 2010
    Location
    Manchester
    Posts
    8,331
    They usually have half cock and full cock. The half cock position is very close to the full cock so you might have missed one click. Or not gone far enough. If not take the lock plate off and have a look at the lock and see if it is clean and there is no bad wear on the sear.

  4. #4
    Join Date
    Sep 2007
    Location
    Rugby
    Posts
    363

    Flintlock cocks

    Thanks for the info, I will invesiigate! Regards Daveh
    If you dont do it today, you might not be able to do it tomorrow!

  5. #5
    Join Date
    Sep 2007
    Location
    Rugby
    Posts
    363

    Old flintlock cocks

    Second cock found, quite a long way after half cock. Thanks, Regards Daveh
    If you dont do it today, you might not be able to do it tomorrow!

  6. #6
    Join Date
    Jan 2010
    Location
    Grimsby
    Posts
    630
    Thanks for putting the end post up Dave, my inquisitive nature had got the better of me, I knew there would be a full cock and probably about as far on again as half cock was but I wouldn't have got to sleep without your last response
    Good Deals with Mikewaring, ggggr, watchsapart, Majex45, Nhill, zebedee71,Eredel,Hawksthorn,Red Bob, Stanbridge,Barrow_Matt,Mr.Fixit-Norm, turbo33 .atb thankyou all Neil

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •