Check out this incredible engraving!

**Garvin** · 10-06-2021, 04:55 PM

**HW777** · 10-06-2021, 05:29 PM

It does make me wonder how many air guns would sell if they were all hand assembled, fitted too the buyer and engraved ?

I don't think that would have stopped me owning one but it would be just the one

**Garvin** · 10-06-2021, 05:44 PM

Originally Posted by HW55T

It does make me wonder how many air guns would sell if they were all hand assembled, fitted too the buyer and engraved ?

I don't think that would have stopped me owning one but it would be just the one

Generally I'm not keen on engraving on airguns, except very old ones. But I do like to see skill.

I think engraving animals on airguns is pretty naff, save perhaps squirrels or rats and only then if done really well.

**jedburgh** · 10-06-2021, 07:02 PM

An interesting pierced top lever on the Purdey .

**cordite50** · 10-06-2021, 07:45 PM

Work like that on the above guns represents just about the highest level of skill achievable in steel. It is not moulded but carefully cut out, the background removed with tiny chisels, and then the surface punched and cut and filed to shape to give depth to the forms. To do such work makes it necessary to employ a microscope, and it takes a long long time.
There are relatively few engravers who can currently do such work which makes such a job eye-wateringly expensive and only justified on a top quality ,top of the range, hand built weapon. Such guns will exist for hundreds of years as examples of the best 20th century work. Is it possible to improve on this standard ??
Wonderful to see, and marvel at the craftsmanship but sadly only for the very very wealthy collectors, usually in
the USA ( or Wales ) lol.

**micky2** · 11-06-2021, 07:38 AM

Originally Posted by cordite50

Work like that on the above guns represents just about the highest level of skill achievable in steel. It is not moulded but carefully cut out, the background removed with tiny chisels, and then the surface punched and cut and filed to shape to give depth to the forms. To do such work makes it necessary to employ a microscope, and it takes a long long time.
There are relatively few engravers who can currently do such work which makes such a job eye-wateringly expensive and only justified on a top quality ,top of the range, hand built weapon. Such guns will exist for hundreds of years as examples of the best 20th century work. Is it possible to improve on this standard ??
Wonderful to see, and marvel at the craftsmanship but sadly only for the very very wealthy collectors, usually in
the USA ( or Wales ) lol.

I totally agree with the above. not to everybody's taste. but the amount of skill to do that is to be admired.
Thanks for posting the photos Danny.

**barrel** · 10-06-2021, 08:00 PM

absolutely stunning, thanks for posting.

Kindest regards

Barrel

**Geezer** · 10-06-2021, 09:47 PM

I can and do really appreciate the skill involved.

But I not only don’t get excited by engraving on guns of any kind, I actively dislike it. A gun is a tool. Tools should be functional.

I’d rather have a really good plain hammer than an Armani-designed and branded hammer.

I do like deep bluing, or fine colour case-hardening, or good walnut, but little swirly metal things of rhinos or birds or whatever do more than leave me cold. They seem trivial or fatuous. If someone gave me the chance to have Purdey or H&H make me a gun for free, it would be plain and simple but finished brilliantly, not have little pictures of stuff carved into the metal or wood.

Same with, for example, wristwatches. I can appreciate a nice one. But not something (however well made) two-tone gold/platinum, or with diamonds stuck all over it.

Sorry, minority opinion, but 99% of firearm engraving, even if of high quality, is, to quote Princess Anne, “naff”.

Thread: Check out this incredible engraving!

Thread Tools

Display

Hybrid View

Check out this incredible engraving!

Sculpted engraving.

Posting Permissions