Help stripping and sorting a HW35k

[Mr.Fixit-Norm]

If you watch the hw80 strip down video on the website it is essentially the same. The new 35 specific video will cover the spring room variation and how to work it out. This should save me an hour a week phone time.

Remove trigger, unscrew rear block 3/4 of the way and you should be able to "feel" any preload by wiggling the trigger block, or if you are an advanced student, poking a screwdriver into the spring coils and testing the pressure.

In honesty I would expect the spring to be rattling around in there by this point

Where about is the video for the Hw80 strip down ?

Not sure if I’m classed as an advanced student but I have stripped down an Original 66 and a 75 sorted them out including adjusting the mechanism to allow the 75 to fire. I did get quite a bit of help on here though

[tinbum]

Where about is the video for the Hw80 strip down ?

Not sure if I’m classed as an advanced student but I have stripped down an Original 66 and a 75 sorted them out including adjusting the mechanism to allow the 75 to fire. I did get quite a bit of help on here though

Unfortunately I can't provide links to help members, but a quick google of tinbum or tbt along with air guns should take you in the right direction

I have a youtube channel too, but that is full of silly, irrelevant nonsense! https://youtu.be/JiifU0Z-AVI

[Mr.Fixit-Norm]

Unfortunately I can't provide links to help members, but a quick google of tinbum or tbt along with air guns should take you in the right direction

I have a youtube channel too, but that is full of silly, irrelevant nonsense! https://youtu.be/JiifU0Z-AVI

Thanks Nick, I’ve just been watching some of your YouTube videos on stripping the 80 and also on short stroking, may I say they’re excellent, straight forward, easy to understand and in real time too which is nice, plus no silly music !!!

I think I now know where to start on the 35k

Cheers,

Norm

[bighit]

Did weihrauch at one point not fit square section springs ?

[tinbum]

Did weihrauch at one point not fit square section springs ?

They did and the date fits. They had a nice rounded edge and were an almost golden colour iirc

[Mr.Fixit-Norm]

They did and the date fits. They had a nice rounded edge and were an almost golden colour iirc

Interestingly chambers advertise several springs for the Hw35 inc two Ox springs. Once apart I can decide what to do but I do know I want to reduce the cocking effort considerably !

[Mr.Fixit-Norm]

No comments on the stock yet. I’m curious about the forend finger grip as I can’t find anything like it on any pics of 35’s ?

Norm

[bighit]

They did and the date fits. They had a nice rounded edge and were an almost golden colour iirc

I'm sure I saw it on here of the WOC years ago. .

[T 20]

I'm sure I saw it on here of the WOC years ago. .

The early MK1 HW97k used a square section mainspring but I've never heard of any other Weihrauch using one.


All the best Mick