Saxby and Palmer Ensign Air Rifle

[MrPellet]

Hi, I'm on the other side of the pond and recently acquired a beautiful Saxby and Palmer Ensign air rifle. It doesn' t look like its had much use. It had the pump and 12 cartridges, both plastic and metal. My concern is that I may be missing some of the adapters to charge the cartridges. It appears that the adapter configuration changes based on if your using plastic or metal cartridges. I was hoping to attach some pictures of what I currently have and the documentation that I have for the pump adapters, but I don't believe I've been granted that permission level. Does anyone know if any of these adapters are available or possibly manufactured by a 3rd party? Otherwise, would be the only source for this? Thanks.

If I can get access to post pictures, I'll follow-up with what I have.

[urx]

The chapmwho is most likely to have answers for you is ACAllday on hee

[AC all day]

Hi and welcome to the club.....
I assume you have the big bench pump, it will have a big silver shroud which your cartridges will screw into. This is unscrewed and a brass bush is screwed back on, this increases the thread size and reduces the depth the probe enters the cartridge. Other bushes were available to convert the pump to charge the pistol cartridges. I have some, not all the bushes and various other spares for the cartridges.

[MrPellet]

Hi and welcome to the club.....
I assume you have the big bench pump, it will have a big silver shroud which your cartridges will screw into. This is unscrewed and a brass bush is screwed back on, this increases the thread size and reduces the depth the probe enters the cartridge. Other bushes were available to convert the pump to charge the pistol cartridges. I have some, not all the bushes and various other spares for the cartridges.

Thanks ACallday. This is an awesome site. Yes I have the big pump. Here s a pic of the pump with the adapter that I have.



I also have the chrome adapter that you can see in this picture as well as the plastic and metal cartridges. With the pieces here, I haven't seen a way to charge the cartridges. I would like to charge both metal and plastic.



The only document I have is this, which shows some configurations of the pump and adapters as well as part numbers:



I have an image of the instructions below, but its too hard to read. Have any idea where I might find this in pdf?



Thank you for your time.

[AC all day]

Hi mate, your pictures aren't showing, I have sent you a PM which might help.

[loiner1965]

if anyone knows about your ensign then marks the man.....he has kept my brococks breathing on 2 occassions so far