Feinwerkbau 150 schematics / parts list

[robs5230]

Hi.
Does anyone have the schematics / parts list for the FWB150?

I've seen something on the vintage airguns gallery, but there appears to be a spring that is part of the catch assembly that is not identified on the schematic on there

I'm particularly interested in the cocking lever catch arrangement, and the parts that make this work

Thanks Rob

[ptdunk]

https://www.feinwerkbau.de/ceasy/resource/?id=538-0

[T 20]

Hi.
Does anyone have the schematics / parts list for the FWB150?

I've seen something on the vintage airguns gallery, but there appears to be a spring that is part of the catch assembly that is not identified on the schematic on there

I'm particularly interested in the cocking lever catch arrangement, and the parts that make this work

Thanks Rob

I had to sand the back of the breech seal down on my 300 to get the cocking lever to latch correctly, Rob.

So it may not be as bad as you think.





All the best Mick

[robs5230]

I had to sand the back of the breech seal down on my 300 to get the cocking lever to latch correctly, Rob.

So it may not be as bad as you think.





All the best Mick

Hi Mick.
I did that on one of my 300's too.

This 150 has some parts missing which I'm trying to identify. It wont latch up as a part / parts of the latch system within the lever are not there

Cheers

[robs5230]

https://www.feinwerkbau.de/ceasy/resource/?id=538-0

Cheers for that. This is the schematic I saw on Vintage airgun gallery

Looking at a rifle that has some bits missing.
Pretty sure, that there is a spring at the front end of part 26, the main cocking lever. This schematic doesn't identify it as a separate part


Thanks