Results 1 to 6 of 6

Thread: Webley MK3

  1. #1
    Join Date
    Sep 2015
    Location
    Burgess hill
    Posts
    247

    Webley MK3

    Hi all
    Have a MK3 in 177 ,what ft-lb should I expect ?
    I need to find a loading tap lever of the late type ,as the one I have has broken and been repaired
    Finally it is a late action c1971. But is in a very early stock stamped no2022 .
    So I need a late stock to either buy or swop ?
    Cheers ian
    Last edited by Helm; 08-10-2022 at 09:37 AM. Reason: Mistake

  2. #2
    Join Date
    Jul 2022
    Location
    Braintree
    Posts
    44

    Webley Mk3

    Hi Ian
    The MK3’s I’ve had over the years were all between 8-10 Ftlbs.
    Can’t help you with spares I’m afraid but might be worth phoning Protek or Knibbs (they sometimes have items not listed on their website…worth a try!) All the best.

  3. #3
    Join Date
    Jul 2012
    Location
    cambridge
    Posts
    909
    As Tinram says really, the .22 ones are the ones that tend to make the higher power, sometimes 10.5, even nudging a bit more whereas the .177 version can be quite a bit lower mabe 8.5 ish. There's quite a bit it depends on, it's more condition of the working parts, fit, how it's been set up etc rather than age alone. Stocks do turn up on auction sites but seem to go for quite a bit but they are around. Just watch out for splits or repairs around the screw holes. Nice old rifles though.
    Last edited by trajectory; 09-10-2022 at 11:36 AM. Reason: Sites for sights!

  4. #4
    Join Date
    Jun 2012
    Location
    North Wales
    Posts
    3,173
    Check you PM please

  5. #5
    Join Date
    Sep 2015
    Location
    Burgess hill
    Posts
    247
    Hi thanks for the replies cheers ian

  6. #6
    Join Date
    Sep 2015
    Location
    Burgess hill
    Posts
    247
    Thanks deejavue missed that ian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •