Morning All,

I bought an Airsporter to tidy up a while ago, but not looked at it properly since it arrived.

Everything seems ok but the action moves slightly at the foreend - this cant be right and must affect accuracy...Having looked at it, there is a stock fixing bracket attached to the action by a small threaded stud and nut..the two stock foreend screws fix to this bracket.. there was a small amount of play in the bracket allowing it to slide along the action by about 5mm...I tighened this nut up and the stock and action now have no movement - this is good. However having tightened it, the underlever wont operate - is the small amount of movement in the bracket necessary to allow the underlever to move? If so how do you eliminate the stock/action movement?

So, what am i doing wrong? is something missing, bent? or does this nut need to be carefully nipped up just enough to secure the stock but still allow the underlever to operate? does the bracket need to be locked at a certain angle?

Any ideas?

Thanks

Jon