Modified Sharp Innova Mk2

[ratbuster2240]

It's coming along Rapid. The pump tube was pitted so I swapped it with a good condition webley rebel tube. I spent most of the day trying to set the piston length and blow off valve to 11fpe.

[--ped--]

looks good James Steve has new better sears for the ally breech's
the ace trigger blocks were made from monkey metal and i had a small run made in billet alloy

[ratbuster2240]

Great thanks for that Ped I'll see if he
has one. I've also fitted a rebel piston seal.

looks good James Steve has new better sears for the ally breech's
the ace trigger blocks were made from monkey metal and i had a small run made in billet alloy

[jirushi]

Nice little detail: I stumbled upon the sears that Steven has now in Bali, a year ago. My girlfriend Sarah and I were walking in the city of Klungkung, where the Dutch waged a bloody war unfortunately. Anyway, in the main shopping street my jaw dropped when I saw two Innova's hanging from the wall. This ironmonger turned out to have boxes of Indonesian Innova spares, and ally breeches too. Lots of goodies.

[Rapid7Nick]

Not too sure how to load pictures yet. Although I machined up an alloy block for my used and abused Innova. I did away with the spring loaded probe relase and change to cocking bolt.

[ratbuster2240]

I bet Sarah gave you the biggest eye roll. They love them out there for hunting.

[ratbuster2240]

I seem to remember I think you sent me some photos and I posted them up?
Some very clever machining there.

Not too sure how to load pictures yet. Although I machined up an alloy block for my used and abused Innova. I did away with the spring loaded probe relase and change to cocking bolt.

[jirushi]

I bet Sarah gave you the biggest eye roll. They love them out there for hunting.

Sarah is an amazing lady: she never complains about airguns. Because of that, I always try to show interest in her horseriding hobby

[ratbuster2240]

You've found yourself a keeper! We all need hobbies to enjoy.

[Rapid7Nick]

I seem to remember I think you sent me some photos and I posted them up?
Some very clever machining there.

May have done. Pretty sure I posted this on a few forums back then.

[norris]

Alloy breech block,I ask some one that use to make PCP rifles and now tunes PCP's to make me one.
He couldn't as it wasn't posibleto machine a replacement.

[ratbuster2240]

You can get them from Indonesia and they look almost identical to the original plastic.

[--ped--]

Ged has made a few as well

[ratbuster2240]

He's made some nice stuff over the years.

Ged has made a few as well