Results 1 to 9 of 9

Thread: Kral puncher pro mods

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2012
    Location
    Chelmsford
    Posts
    2,078
    As you say, simple to work on and parts are very cheap and available, I get all mine from Big Dans Airguns as he is a Kral dealer with great back up

    My pro500 had three calibre kits and Id swap around, simple to tune for better sub12 performance and big shotcounts, Ive sold all my other pcps and have just a Kral a Benjamin(kral) and a Kuzey(kral) as there just great for my useage and I can service them myself.
    Yes Ive had dozens of pcps costing much more, their all gone now but these remain, oh and now a growing collection of springers
    bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars

  2. #2
    Join Date
    Jun 2012
    Location
    clacton on sea
    Posts
    268
    Bagnells keep all the parts for converting the Puncher to having a interchangeable bottle system . The bottle valve works well with minimal air loss.
    Very handy as you will run out of pellets before needing a top up!

  3. #3
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    24,420
    bagnals has a good selection of spares for most guns

  4. #4
    Join Date
    Jun 2012
    Location
    clacton on sea
    Posts
    268
    I have been asked what difference the Lanes reg has made to the Kral and the answer is huge!
    Kral to get the power down from 25 ft pounds to 12 ft is they restrict the valve transfer port as well as the power adjuster.
    Sadly they then have a very strong hammer spring to work against the 250 bar fill pressure.
    By fitting the reg you can open the transfer port all the way from valve to barrel so no restrictions.
    Then as you only need 45 to 50 bar to achieve the 11'5 pounds have a very light hammer spring ,
    Mind you you can get thru a tin of pellets before needing to refill !!

  5. #5
    Join Date
    Sep 2012
    Location
    Chelmsford
    Posts
    2,078
    The only Kral I have that isn’t Lane regged is my np300, every other gun benefits from being regged and setup sub12, as you say a huge shotcount, easier cocking and less rapport, why Kral don’t supply guns setup better beggars belief.

    My benchrest project Kral made up of various parts gave me my first 250, I now use it for sticks hft.
    That runs a little npo3 cylinder with a Lane, titanium piston with 10mm less stroke and an ssg giving me 85 very consistent shots over 35 from the original setup.

    The newer stuff definitely has seen a step up in barrel quality and the triggers

    Enjoy
    bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •