Bulmer does a strip BSA 240 Magnum

[Ferrets Bueller]

Does anyone have a copy of the above please

[Benelli B76]

Ferrets, I have never seen any instructions on stripping but I have done it myself and found it not difficult to strip and reassemble. There are just a few pins holding the parts in place. I always take pics with my phone to record the orientation of the various components as they are removed.

Baz

http://i.imgur.com/wXCuCJa.jpg

[Troubledshooter]

Here's the three page strip article on the 240:

https://i.postimg.cc/PqFVMs2k/BSA-24...-12-03-1-3.jpg
https://i.postimg.cc/25VJBSrD/BSA-24...-12-03-2-3.jpg
https://i.postimg.cc/tTwKc4nN/BSA-24...-12-03-3-3.jpg

[Ferrets Bueller]

Here's the three page strip article on the 240:

https://i.postimg.cc/PqFVMs2k/BSA-24...-12-03-1-3.jpg
https://i.postimg.cc/25VJBSrD/BSA-24...-12-03-2-3.jpg
https://i.postimg.cc/tTwKc4nN/BSA-24...-12-03-3-3.jpg

Thank you mate much appreciated

[GRAZY]

Always had a love of the 240s, I’m lucky to have both the silver and black variants but do find the hinge pin works it’s way loose on the black one after a bit of use. Would have liked to see these made a bit longer and maybe more grip and barrel options. From the box it does look like a longer version was planned but never made to my knowledge.

[Benelli B76]

Some are inaccurate and need a slight mod due to the pellet having to jump the gap between the end of the barrel and the false "muzzle" of the pistol while in recoil mode. When sorted makes a terrific improvement to accuracy.

Baz

[Ferrets Bueller]

Some are inaccurate and need a slight mod due to the pellet having to jump the gap between the end of the barrel and the false "muzzle" of the pistol while in recoil mode. When sorted makes a terrific improvement to accuracy.

Baz

What kind of mods are you referring too?

[Benelli B76]

What kind of mods are you referring too?

One simple mod, open up the hole slightly in the end of the "slide" muzzle so the pellet does not clip the side on the way out. The actual muzzle of the barrel is far back from the exit point from the pistol and the pellet is leaving as the pistol is jumping slightly. See red arrows my pic link above.

Baz

[Ferrets Bueller]

One simple mod, open up the hole slightly in the end of the "slide" muzzle so the pellet does not clip the side on the way out. The actual muzzle of the barrel is far back from the exit point from the pistol and the pellet is leaving as the pistol is jumping slightly. See red arrows my pic link above.

Baz

Ah yes makes sense i'll give it a go How much material are you removing?

[Ferrets Bueller]

Always had a love of the 240s, I’m lucky to have both the silver and black variants but do find the hinge pin works it’s way loose on the black one after a bit of use. Would have liked to see these made a bit longer and maybe more grip and barrel options. From the box it does look like a longer version was planned but never made to my knowledge.

Yeah I love these pistols always longed after one when I was a teen, so love owning them now