BSA S10 MKIII Stock - Can Sling Stud Mounted Bipods be attached?

[Trojan1994]

Good Evening All,

Its starting to look that my dream gun may become reality soon, as such, can the S10 MKIII stock be fitted with sling studs so that a bipod, i.e. Harris, can be attached ?

Does it work fine or are there issues I should be concerned about, i.e. weak spots on the stock, interefering with action, etc?

Any advice is greatly appreciated.

Regards,

Tony

[Matt C.]

Tony,

It can be done, I did it on mine, you need to put the front mount in the wood just back from the front, there is a lot of bottle clearance. I needed to grind the bolt a bit, before fitting the nut, to get it to fit. I loctited mine, that was about a year ago, no problems. I have used a harris bipod on this mount which in my case is a QD swivel. I hope this helps

Take care, Voldy

[The Specialist]

Harris do a swivel eye that is a rectangular flat plate with two screw holes, they are good for S10s.

[Trojan1994]

to see what they have in stock as far as the stud kits...

Regards,

Tony