Tell 3 replacement grips

[micky2]

9

Baz

Hi Baz,many thanks for the se/no, that is a very early one, l have se/no 4

[cozzamec]

The bluing on that is very nice Baz, is that original do you think?

[45flint]

That is awesome!

[Benelli B76]

The bluing on that is very nice Baz, is that original do you think?

No Mike, it has been nicely refinished. Grips definitely wood, see small chip off left hand grip. Barrel marked Kal 4 1/2mm Cal. 177
Think bought for £700.

Baz

[45flint]

That really is what the Tell 3 should have been.

[Benelli B76]

Anybody had any success getting the adjuster screw that can be accessed through the top of the pistol to give a heavier trigger pull ? Trigger much too light at the moment and sear not safely engaging.

Baz

[draitzer]

I've adjusted triggers on a couple Tell 3's with no issues. Possibly your sear piece has worn, or is stuck and not moving as you try to 'heavy up' the engagement? You might try removing the screw and pushing down with a punch to see if any motion happens, then penetrating oil if necessary.

Don R.

[Benelli B76]

I've adjusted triggers on a couple Tell 3's with no issues. Possibly your sear piece has worn, or is stuck and not moving as you try to 'heavy up' the engagement? You might try removing the screw and pushing down with a punch to see if any motion happens, then penetrating oil if necessary.

Don R.

Thanks Don, can the screw be removed through the top ? Mine seems to come to a dead stop.

Baz