A Webley Junior pistol project?

[harry mac]

A big "THANK YOU" to the man above. The pistol arrived today and is in pretty decent nick. I've stripped it down,checked it and fitted a new mainspring and managed a quick (Bloody miserable weather) plink. Once I've put a few more shots through it, it will be going onwards to a nice chap who struggles with the bigger pistols now. to plink with.

Ps the foresight will be on its way shortly----And have a bump to see if anyone can find the stock screws for you.

No problem. I'm just glad someone will get some use out of it.
So, does anyone have any front stock screws for a Milbro G27? I think the screws for the Mod 27, Mod 25 or any of the G series rifles would fit.

[guitardan]

A bump up for the stock screws for Harry and a bump up for a cheapo Slavia ZVP if Guitar Dan is after one now?

Yes I will startvme hunt for a zvp plinker now @ggggr
ATB
Dan

[ggggr]

Just a quick update. I got the ok to post off the pistol to the chap it is going to and it has now arrived.
I included a rough (very rough) set of wooden grips that were bonded to the frame of an earlier Junior I bought the other year. I also sent the old mainspring so he can attempt to re temper it if he wants---------although it was shooting fine with the new spring I fitted. I also widened the rearsight notch a little to make it a bit easier for old eyes to focus. I've suggested a bit of paint of a colour of choice on the foresight as well.

[Benelli B76]

RFD had a shpment of Chinese break barrel pistols in that all shot too high. I made slightly thicker breach seals which made the barrels tip down very slightly to shoot correctly at about 15 metres.

Baz