This very unusual Acvoke has recently surfaced, its most obvious distinctive feature being the brown grip plates, as all known retailed Acvokes had black plates.













Closer examination also shows that the cylinder breech has a different form to the norm, and consists of a discrete machined plug let in flush with the grip frame. The normal breech closure shown in the right hand picture takes the form of a cap that fits over the grip frame:









The gun is clearly an early version, as it has the early cocking lever with pellet seater, and has no serial number. The grip plates are professionally made and almost certainly original. They have the same 1947 date and other markings molded on their inner surfaces as the normal early black grips. The brown mottling effect, something very difficult for the amateur duplicate, has the same quality as that found on brown Webley grips.


Although it has no serial number, the muzzle plug is stamped with “A5” , perhaps a prototype reference number?






The gun looks to be in excellent condition, has had little use, and appears to have had no restoration work.

So what is it? My best guess is that it is an early prototype. This would be consistent with the known existence of two prototype bodies, with no serial number, that were found accompanied by a .22 barrel, a barrel with a cork-firing adapter, and sets of black and brown grips. It is believed that these were demonstrators used by J.B.Arrowsmith (the designer) in the early days of the pistol.

If Accles & Shelvoke were initially considering both black and brown grip plates, I wonder why they opted for black? To my eyes, the brown plates are classier and suit the pistol much better.


The pistol is now in the possession of Protek Supplies and will no doubt be appearing on their website shortly.