Cross section reference; also noted in air piostols. Posted in general airguns info on some Webley pistol threads.
Cross section reference; also noted in air piostols. Posted in general airguns info on some Webley pistol threads.
Webley Pistol Threads
Following a request from a fellow member regarding the special threads on W & S air pistols namely the MKI; Senior and Premier 1: I have gathered as much info as I can and list it below, I understand the form is Standard Whitworth.
0.106"Dia x 50 tpi S35 brl catch stop sc
S22 brl jnt lock sc
M32a brl jnt lock sc
M32 tr adj lock sc
0.150"Dia x 36 tpi M14 grip sc
M15 sight sc
S15 sight sc
S13 & 14 grip sc
S34 brl jnt sc
M39 sight loc'n peg
0.150"Dia x 50 tpi M31 tr adj sc
P56 tr adj sc
0.180"Dia x 50 tpi S21 brl jnt sc
M23 brl jnt pin
0.250"Dia x 30 tpi M212 piston sc
0.853Dia x 24 tpi S10 & M9 breech sc
Some may be for straight grip pistols, I don't have that info; but I hope this helps collectors in general
Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"
Very useful information, thanks Ray.
I wonder if any model engineers etc know of anyone who could make taps for some of these? I think probably the most useful one would be the barrel pivot one ad the threads are sometimes a bit mangled in the end cap/guide/ Maybe one for the grip screws as well?
Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"
Try Peter Dyson he made me tap and die for the cleaning rods some time ago. He will make springs ect.
Peter Dyson & Son Ltd
3 Cuckoo Lane
Honley
Holmfirth
Yorkshire, HD9 6AS (map)
Tel: 01484 661062
I'm just wondering if anybody else would be interested in getting some taps done? I'm also wondering at what sort of cost.
Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"