You also have a standard pattern cocking lever. Have you inquire that it may be a light pattern or junior model of a standard might be a rare one. Whats the serial number. You don't want to get rid of it or alter it if its a genuine mod for a customer by BSA you might regret getting rid of it as a rare bit of kit. I assume the trigger block was changed thats if, as an improvement over the early trigger units.
Although you have the gap for a tang on the trigger guard area on the stock, how do you know that the stock is a replacement, the original stock broken. With the trigger block and cocking lever of a standard, i would be more inclined to think the stock is the odd one out, although both light pattern and standard stocks are similar in shape.
Last edited by BC312; 28-02-2024 at 10:53 AM.
Did not know that! Thank you. How did you know the cocking lever is from Standard? I mean, I see lots of light patterns with that lever. No one picked that up before. No idea what is genuine here unfortunately. Serial number on the trigger block is S34414. The only other marking I have is Q7 or 07 on the barrel under the cocking lever. The seller did not tell me much what the rifle was, and I was just trusting it to be genuine as I was buying at the airgun fair. Just asked is this a light pattern, the seller was not sure what I meant, and one of the guys next to me said that it must be. Been looking for one for ages, so I just grabbed it.
Last edited by airRookie; 28-02-2024 at 12:07 PM.
Well the early light pattern either has a duck billed lever of two types and the later with side catch on the cocking levers. The standard s or c post 1919 patterns have a release at the front of the cocking lever. Stacked up against the odds of having standard trigger block and lever against a stock with a tang i would say the stock needs changing because if guns are abused as most were then the stock would get damaged first. If in the 1920-30 why would you put on a standard trigger unit and cocking lever on a older gun, at the time new guns, i suspect an expensive exercise at the time, why not purchase a junior or ladies standard gun, plenty about at the time.
Does your gun have a stamped receiver cylinder on the top like BSA paintent etc like the early pre WW1 BSA have, as a standard pattern has no stampings, it had etched markings in silver, so if it wore off over time it would be a plain cylinder. You could have a rare bit of kit, i think they done a Ladies or junior pattern standard, not sure if they are rare. As for people selling not all sellers are experts.
PS show us more detailed photos would help.
Have a look here might help. https://forum.vintageairgunsgallery.com/
Looking at your pictures it looks like you just need to change the trigger guard, not sure if it a made one, home workshop job.
I have taken more photos now. Please have a look at the way the foresight is positioned. The rifle shoots very accurate, but what the hell is with the foresight being to the side?
https://ibb.co/fqm8fbW
https://ibb.co/b5tz7Lf
https://ibb.co/BLXfWRL
https://ibb.co/RzgmBvW
https://ibb.co/WpjD0bw
https://ibb.co/H4Q6BCh
https://ibb.co/crrVFY9 <- foresight picture
https://ibb.co/4gFGH9y