SMK (SNOWPEAK m11)

[Sid66]

Hi All

looking for advice on the SMK M11 i have it in 22cal but the OM silencer is well Crap but the thread on the barrel is opposite to what i need to fit my atom anyone know where i can purchase the correct adapter nothing on the bay and google not much better

thanks for any help

[Neil54]

Do you mean left hand thread?

[Captain Bongo]

Is it an odd metric thread?
https://www.ant-supplies.uk/barrel-m...-adapters.html

[Sid66]

Do you mean left hand thread?

Yes Left hand

[Neil54]

Is it not possible to open the moderator and fit felt and hair curlers?

[Shed tuner]

is it 14mm ?

[Sid66]

is it 14mm ?

Yes 14mm

[Sid66]

Is it not possible to open the moderator and fit felt and hair curlers?

what type Neil?

[Neil54]

Either thick felt or green pan scrubbers wrapped around small hair curlers.

[Berber]

what type Neil?

I just use the Velcro type to fit, or if they are a tad too small, thin felt or old toweling around them. But I do use 3mm felt sticky pads against the facing face of the baffles ( penny washers or delrin). Slightly oversized holes compared to the baffle hole.

[Anothermiss]

Either thick felt or green pan scrubbers wrapped around small hair curlers.

I wouldn't use green pan scrubbers. Some are impregnated with micro quartz crystals which I wouldn't want near my barrel/bore

[Sid66]

Either thick felt or green pan scrubbers wrapped around small hair curlers.

Thanks Neil

[Sid66]

I just use the Velcro type to fit, or if they are a tad too small, thin felt or old toweling around them. But I do use 3mm felt sticky pads against the facing face of the baffles ( penny washers or delrin). Slightly oversized holes compared to the baffle hole.

Thanks Mate

[Sid66]

I wouldn't use green pan scrubbers. Some are impregnated with micro quartz crystals which I wouldn't want near my barrel/bore

Thanks for advice

[Shed tuner]

Yes 14mm

so an airsoft 14mm ccw silencer attachment on an airgun.. very strange.